Special Review and Approval Procedure for Drug Registration of the State Food and Drug Administration

作者:法律资料网 时间:2024-06-17 11:35:13   浏览:9939   来源:法律资料网
下载地址: 点击此处下载

Special Review and Approval Procedure for Drug Registration of the State Food and Drug Administration

Commissioner of SFDA


Special Review and Approval Procedure for Drug Registration of the State Food and Drug Administration



(SFDA Decree No. 21)

The Special Review and Approval Procedure for Drug Registration of the State Food and Drug Administration, adopted at the executive meeting of the State Food and Drug Administration (SFDA) on November 18, 2005, is hereby promulgated and shall go into effect as of the date of promulgation.


Shao Mingli
Commissioner of SFDA
November 18, 2005





Special Review and Approval Procedure for Drug Registration of the State Food and
Drug Administration


Chapter 1 General Provisions

Article 1 This Procedure is formulated for the purpose of effective prevention, timely control and elimination of the hazards of public health emergencies to ensure the health and safety of the public in accordance with the Drug Administration Law of the People’s Republic of China, Law of the People’s Republic of China on the Prevention and Treatment of Infectious Diseases, Regulations for Implementation of the Drug Administration Law of the People’s Republic of China, Regulations on Preparedness for and Response to Emergent Public Health Hazards, and other relevant laws and regulations.

Article 2 The special review and approval procedure for drug registration refers to the procedure and requirements of the State Food and Drug Administration to carry out special review and approval of drugs for handling public heath emergencies under the principle of unified leadership, early involvement, expeditiousness and efficiency, and scientific review and approval, in an effort to approve drugs for the prevention and treatment of public health emergencies as soon as possible under the threat or after the occurrence of public heath emergencies.

Article 3 The State Food and Drug Administration may, according to law, decide to follow the Procedure to conduct special review and approval of drugs for public health emergencies in any of the following circumstances:
(1) Where the President of the People’s Republic of China declares a state of emergency or the State Council decides that certain areas within a province, autonomous region or municipality directly under the Central Government are in a state of emergency;
(2) Where the contingency program for public health emergencies is initiated according to law;
(3) Where the drug reserve department or the health administrative department of the State Council proposes a special review and approval for drugs having existing national drug standard;
(4) Other circumstances applicable to special review and approval.

Article 4 The State Food and Drug Administration is responsible for the review and approval of clinical trials, production and importation of drugs for the prevention and treatment of public health emergencies.

The (food and) drug regulatory department of a province, autonomous region, or municipality directly under the Central Government shall, upon entrustment of the State Food and Drug Administration, be responsible for on-site inspection and sampling of the pilot products of the drugs for the prevention and treatment of public health emergencies.


Chapter 2 Application Acceptance and On-site Inspection

Article 5 Where the special review and approval procedure for drug registration is initiated, the State Food and Drug Administration is responsible for the acceptance of registration applications for drugs for public health emergencies.

Where a drug or a preventive biological product for public health emergencies has not been marketed in China, the applicant shall, before submission of the registration application, provide the State Food and Drug Administration with relevant research and development information.

Article 6 The applicant shall submit a registration application with relevant technical dossier to the State Food and Drug Administration according to the relevant provisions and requirements on administration of drug registration.

The registration application for drug for public health emergencies may be submitted in electronic form.

Article 7 Before submitting an application for registration, the applicant may provide a feasibility assessment application with general information and relevant explanations. The State Food and Drug Administration shall only comment on the scientific rationality and feasibility of the drug project, and respond within 24 hours.

The response to a feasibility assessment application shall be neither deemed as the review and approval opinion nor legally binding on the review and approval result of a registration application.

Article 8 The State Food and Drug Administration shall organize an expert group to evaluate and review the registration application for drug for the prevention and treatment of public health emergencies, make a decision within 24 hours on whether or not to accept the application, and notify the applicant.

Article 9 Where a registration application is accepted, the State Food and Drug Administration shall organize technical review of submitted dossier within 24 hours and at the same time notify the (food and) drug regulatory department of the province, autonomous region or municipality directly under the Central Government where the applicant is located to conduct an on-site inspection on drug research and development conditions, and organize sampling and testing of pilot products.

The (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government shall, within five days, submit the on-site inspection result and relevant opinion to the State Food and Drug Administration.

Article 10 The (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government shall organize staff from the departments of drug registration, drug safety and inspection, etc. to participate in the on-site inspection.

The National Institute for the Control of Pharmaceutical and Biological Products shall be notified to send staff to participate in the on-site inspection and sampling of preventive biological products.

Article 11 For drugs that have existing national standards for the prevention and treatment of public health emergencies, the State Food and Drug Administration may directly review and approve the drug in accordance with the relevant provisions in Chapter 6 of the Procedure when it deems there is no need for a clinical trial in accordance with law.

Article 12 With respect to the registration application for a specific vaccine, where only the original virus strain used in the manufacturing is changed while the manufacturing processes or quality specifications are maintained, the State Food and Drug Administration shall make a decision on whether or not to grant the approval within three days after verifying the changed strain used in the manufacturing.


Chapter 3 Testing for Registration

Article 13 After receiving the samples taken by the (food and) drug regulatory department of a province, autonomous region, or municipality directly under the Central Government, the drug testing institution shall immediately organize verification of specifications and laboratory testing on the samples.

The drug testing institution shall complete the testing within the time frame for the drug being applied.

Article 14 For a drug applied first time for marketing, the State Food and Drug Administration may, when necessary, make early involvement by appointing the National Institute for the Control of Pharmaceutical and Biological Products to communicate with the applicant prior to testing for registration so as to timely resolve technical problems which may arise in the process of quality specifications verification and laboratory testing.

With respect to preventive biological products used to prevent and control the epidemic of serious infectious diseases, the State Food and Drug Administration may, depending on the situation, allow the testing for registration and the manufacturer’s self-testing to be performed in parallel.

Article 15 After completion of the specifications verification and laboratory testing on a drug, the drug testing institution shall, within two days, issue its verification opinion and submit it along with the drug test report to the State Food and Drug Administration.


Chapter 4 Technical Review

Article 16 The State Food and Drug Administration shall, within 15 days after acceptance of the registration application for drug for the prevention and treatment in public health emergencies, complete the first round of technical review.

Article 17 Where the State Food and Drug Administration considers that additional data are needed, it shall immediately inform the applicant of the content and timeline.

Where the applicant submits the supplementary data within the specified timeline, the State Food and Drug Administration shall complete the technical review within three days, or, depending on the situations, organize another review meeting within five days, and then complete the review report within two days.


Chapter 5 Clinical Trial

Article 18 Where the technical review is completed, the State Food and Drug Administration shall, within three days, complete the administrative examination, make a decision and inform the applicant.

Where the State Food and Drug Administration decides to approve a clinical trial, it shall issue a Drug Clinical Trial Approval. Where it decides not to approve, it shall issue a Disapproval Notice with reasons.

Article 19 Where an applicant obtains a clinical trial approval, it shall conduct the trial strictly following the relevant requirements in the approval document, and comply with the Good Clinical Practice.

Article 20 Drug clinical trials shall be conducted in institutions legally certified for drug clinical trials. If a clinical trial has to be conducted by an institution not yet certified, a special approval by the State Food and Drug Administration should be obtained.

The application for a clinical trial conducted by an institution not yet certified for drug clinical trials may be submitted along with the application for drug registration.

Article 21 The investigator responsible for a drug clinical trial shall, in accordance with the relevant provisions, timely report adverse events occurred in the process of the clinical trial to the State Food and Drug Administration. If no adverse event occurs, the investigator shall collect relevant information and report to the State Food and Drug Administration monthly.

Article 22 The State Food and Drug Administration shall, in accordance with law, supervise and inspect the clinical trials of drugs for public health emergencies.


Chapter 6 Review, Approval and Monitoring of Drug Production

Article 23 The applicant shall, after completion of the drug clinical trials, submit the relevant data to the State Food and Drug Administration in accordance with the Provisions for Drug Registration.

Article 24 The State Food and Drug Administration shall, within 24 hours after receiving data submitted by the applicant, organize technical review, and at the same time notify the (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government where the applicant is located to conduct the on-site inspection on the drug manufacturing conditions, and organize the sampling and testing of pilot products.

The (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government shall, within five days, submit the result and opinion of the on-site inspection to the State Food and Drug Administration.

Article 25 Any newly-established drug manufacturer or manufacturer with newly-built manufacturing workshops or newly-added dosage forms for production may apply to the State Food and Drug Administration for a certificate of the Good Manufacturing Practice along with the application for drug registration. The State Food and Drug Administration shall, when conducting the drug registration review, immediately carry out an inspection on the Good Manufacturing Practice certification.

Article 26 The drug testing institution shall, after receiving the samples of three batches taken by the (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government, immediately arrange the testing.

Upon completion of testing, the drug testing institution shall, within two days, complete the test report and submit it to the State Food and Drug Administration.

Article 27 The State Food and Drug Administration shall carry out technical review in accordance with Chapter 4 of the Procedure, and shall, within three days after the completion of the technical review, complete the administrative examination, make a decision and inform the applicant.
Where the State Food and Drug Administration decides to approve the drug, it shall issue the Letter of Approval for Drug Registration, and may grant an approval number for the drug at the same time if the applicant has appropriate manufacturing conditions; if it decides to disapprove the manufacturing, it shall issue a Disapproval Notice with reasons.

Article 28 Where a drug manufacturer or distributor, or a medical and health institution finds any new or serious adverse drug reaction or cluster adverse reaction relating to a specially approved drug for public health emergencies, it shall immediately report the case to the local (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government, the health administrative department at the provincial level and the professional institution for adverse drug reactions monitoring.

The professional institution for adverse drug reactions monitoring shall regard drugs specially approved for public health emergencies as critically monitored products, analyze the collected case reports in accordance with the relevant provisions and timely report to the (food and) drug regulatory department of the province, autonomous region, or municipality directly under the Central Government and the State Food and Drug Administration.

The State Food and Drug Administration shall reinforce the reevaluation of approved drugs for public health emergencies after they are marketed.


Chapter 7 Supplementary Provisions

Article 29 The measures for special review and approval of the medical devices for public health emergencies shall be separately formulated by the State Food and Drug Administration with reference to the relevant provisions of the Procedure.

Article 30 The Procedure shall go into effect as of the date of promulgation.





下载地址: 点击此处下载

交通部关于印发《汽车运输行业轮胎技术管理制度》的通知

交通部


交通部关于印发《汽车运输行业轮胎技术管理制度》的通知

1987年9月2日,交通部

各省、自治区、直辖市交通厅(局)、计划单列市交通局:
轮胎技术管理是关系汽车安全行驶,节约能源,降低运输成本的重要工作,是汽车运输管理部门进行行业管理的任务之一。长期以来,汽车运输业缺乏完整的轮胎技术管理制度,存在着轮胎管理不严,使用不当、浪费严重等情况。为加强轮胎管理工作,不断提高轮胎管理、使用和维修水平,深入开展“双增双节”运动,适应经济体制改革的需要,现将部制定的《汽车运输行业轮胎技术管理制度》(以下简称《管理制度》)印发给你们,望组织有关人员认真贯彻执行,并结合本地区实际情况,制订《管理制度》的实施细则。

附:《汽车运输行业轮胎技术管理制度》

总 则
一、轮胎是汽车的重要组成部分,是关系汽车安全行驶、节约能源、降低运输成本的重要因素。凡汽车使用单位都应加强轮胎管理,提高轮胎使用维修的技术水平,以延长轮胎使用寿命。
二、汽车运输行业的轮胎技术管理工作必须贯彻依靠技术进步和预防为主的方针,坚持做到:加强基础管理、合理使用、定期保养、及时翻修。其基本任务是通过对轮胎的综合管理,即从轮胎的计划、选购、装运、验收、保管、使用、保养、翻修、报废、新技术应用、奖惩等方面进行全过程管理。使轮胎在使用过程中安全可靠和在整个寿命周期内实现最佳的经济效益。
三、为了培养轮胎使用维修和技术管理人才,汽车运输行业主管部门在规划和安排职工技术教育工作中,要考虑设置轮胎技术管理和使用维修专业;对轮胎管理人员、胎工和驾驶员要加强培训,以提高其管理水平和轮胎使用维修水平。
四、汽车运输行业主管部门应鼓励轮胎管理和使用维修技术的科学研究,从实际出发,积极推广技术新成就,配备专用设备,不断改善劳动条件,以提高轮胎维修质量和效率,减轻胎工劳动强度,做到文明生产。
五、积极推广使用子午线轮胎。各汽车运输部门应与轮胎生产、翻修部门密切合作,将子午胎的使用技术、翻修技术逐步完善起来,为推广应用奠定基础。
六、根据目前汽车轮胎向无内胎轮胎发展的趋势,本制度适当增加了无内胎轮胎使用与保养的内容。
七、各省、自治区、直辖市汽车运输管理部门,应结合本地区的实际情况,根据本制度制订行业管理的实施细则。
八、本制度适用于汽车运输行业。其他汽车使用单位也可根据本单位具体情况参照执行。

第一章 轮胎的管理
一、胎轮管理人员及胎工的配备
(一)为了加强轮胎技术管理,汽车运输企业和车队应根据其汽车、挂车的保有量和使用轮胎的规格、数量和工作量,建立轮胎管理机构,适当配备专职轮胎管理技术人员,配备比例可根据本单位具体情况自行规定。各地行政管理部门也应有人负责此项工作。
(二)轮胎管理技术人员应具有中专或相当于中专以上的文化技术水平。他们不仅要熟悉轮胎的管理、使用和维修技术,对影响轮胎使用的汽车底盘结构、汽车驾驶技术和汽车的保养修理技术也要具有一定程度的理论知识。
(三)汽车运输企业或单位应配备胎工,车辆较多的企业和单位要设置胎工班(组)。配备比例可按轮胎的规格、数量和工作量自行规定。
(四)轮胎管理技术人员和胎工都应相对稳定,并建立相应的岗位责任制,明确其职责范围和工作任务,具体条款由企业或单位自行制订。
二、轮胎的选购、装运、验收与保管
(一)轮胎的选购
企业或单位应根据轮胎的质量和价格,由技术管理部门提出意见,择优选购。
(二)轮胎的装运
装运轮胎不得与各种油类、易燃物、化学药品及易使橡胶变质的物资混装。运输时应用蓬布遮盖,以免阳光照射及雨淋。同时,轮胎必须竖立放置,内胎如无包装,须充气放在外胎中。
无内胎轮胎以包装状况搬运时,不可拆除胎圈保护器和钢带,吊提必须使用宽幅纤维带。使用叉车搬运,不得用货叉插入中心孔口提升。
(三)轮胎的验收
1.新胎入库必须根据国家标准GB520—82规定的技术要求进行验收,如果发现外观质量与规定不符者,应向原单位提出退换。
2.新胎入库时,应按照其原始单据登记其厂牌、规格等有关情况。
3.翻新胎和修补胎入库前应按照《翻修轮胎成品标准》中规定的技术要求进行检查,不符合者要求原翻修部门进行处理。
4.修补竣工的内胎必须充气试验,检查有无漏气、裂口等不符合修补质量的情况。
(四)轮胎的保管
1.新胎储存在库房内,应立放在特制的胎架上,定期转动其支点,禁止平置堆叠,以免变形。同时,轮胎入库保管,应按类别规格、花纹种类、厂牌、胎体帘线材料、结构类型等分别存放,并根据出厂年月做到先生产者先用。
2.内胎储存如无包装,在适当的充气状态下,悬挂在半圆形的托架上,并定期动转其支点,不要折叠堆置。
3.待翻修的轮胎,在施工前要妥善保管,不得露天放置,日晒雨淋,造成轮胎变质。不得堆叠垛压,以防其变形。待翻、待修的钢丝子午胎,要存放在库房内,以免雨水浸入,造成钢丝锈蚀。备用的旧胎和翻修完工的轮胎,应按新胎的保管方法妥善保管,季节换胎应分车存放,以便原胎装回原车,不致于发生错乱。
4.停用车辆的轮胎,应进行检查,如挖除花纹嵌石,应翻修的要送去翻修。车上装的轮胎要保持适当充气,并将车辆前后桥顶起使轮胎离地,不承受负荷。对长期停用的车辆应将轮胎拆下,另行分配使用。
5.储存轮胎的库房不要设在接近有发电设备或其它产生臭氧的地点。如发电房、电工间等。门窗玻璃应用绿色或兰色的漆涂刷,避免阳光照射。库房内应保持适当的温度、湿度和通风,距离暖气设备至少在一米以外,并不得与石油产品、易燃品、强酸碱类和漆料等放在一起。
6.储存轮胎的库房要有专职保管员,并应建立库房、防火制度。
三、在用轮胎的管理
(一)实行定车、定人、定胎的责任制度
1.有条件的应实行定车、定人、定胎。条件不具备的做到分段定胎,分段考核。
2.换装车上备胎或借用轮胎应及时记录换装地点,行驶里程,损坏情况。
(二)建立轮胎帐卡和有关记录。轮胎管理应建立在用轮胎台帐、轮胎履历卡片和轮胎拆装动态记录,切实掌握车队轮胎实况。为了随时弄清送修情况,应建立外修记录,避免发生差错。
(三)烙(刻)印轮胎自编号
轮胎烙(刻)印自编号便于识别和核对轮胎号码,是轮胎管理工作的一部分。烙(刻)印位置一般在防水线部位。
(四)周转胎的使用
1.为了便于轮胎的翻新周转。应配备一定数量的周转胎,周转胎的数量可结合各地条件作不同的规定。
2.在用轮胎翻修需换用周转胎时,应填写周转胎替换记录,轮胎翻修竣工后仍装原车使用,并交回周转胎。
(五)轮胎的定期盘存
1.每年应进行一次轮胎盘存,时间以选择在第四季度为宜。
2.轮胎盘存时,应组织技术人员、驾驶员、胎工三结合的班子进行。
3.盘存工作包括:核对轮胎数量,估计轮胎成色,检查外观质量,并作出记录,造表存查,总结分析,汇总上报。
(六)轮胎的考核
1.轮胎考核指标:主要考核行驶里程和翻新率。行驶里程采取综合考核和分段考核相结合的办法。综合考核即考核新胎用到报废(包括翻新和未经翻新直接用到报废)的综合平均里程。这是考核轮胎使用实绩的主要指标。分段考核,即分别考核新胎未经翻新直接用到报废,以及新胎经一、二、三……次翻新到报废各个阶段的平均里程。
2.考核范围,除了外单位拨入记录不完整,经过鉴定里程的成分胎,以及由于制造质量差的新胎(须经制造厂质量鉴定予以赔偿者)不作考核外,其它凡是营运车辆的在用胎均应全部列入考核范围。
3.按时作好轮胎实绩考核及资料分析,上报有关部门并对驾驶员公布。
4.统计资料要及时、正确、胎公里与车公里要相符。
(七)轮胎责任事故处理
1.驾驶员或胎工,如发现轮胎有异常损伤或磨损等情况,应及时报告轮胎管理技术员,共同分析原因,采取措施,以防损伤扩大。
2.轮胎早期损坏,经鉴定属厂方(包括翻胎厂)责任者,送原厂,按规定或合同,由厂方负责赔偿处理。属管理失职,使用不当,保养不良而造成损坏者,一律按责任事故处理。
3.凡属责任事故造成轮胎损坏或丢失,可根据情节轻重、损失大小给有关人员以一定的经济处罚。
(八)轮胎的报废
1.为了充分发挥轮胎使用潜力,对轮胎报废必须严格掌握,慎重处理。
2.经技术鉴定不合于翻新、修补标准的轮胎,凡符合下列条件之一,即可进行报废。
外胎的报废条件:
(1)胎侧有连续裂纹,已不堪使用和修复者;
(2)胎面胶已磨光,并有大破洞,已不能继续使用和失去翻新条件者;
(3)胎体帘线层有环形破裂及整圈分离者;
(4)胎圈钢丝断裂或趾口大爆破,无法修复者;
(5)其他损坏不堪使用和修复者。
内胎的报废条件:
(1)有折迭、破裂现象,不堪修复者;
(2)裂口过大,不堪修复者;
(3)老化变质或严重发粘者;
(4)变形过甚者
(5)被油料或有害溶液浸蚀不堪使用者。
3.已批准报废的轮胎应由轮胎管理技术员交供应部门统一处理,在处理前不得作材料胎割用。

第二章 轮胎的使用
一、合理组织使用
(一)新胎的使用:采用“整车换胎”、“季节换胎”、“成双换胎”、“先客后货”、“先主后挂”等使用方法。
1.整车换胎:整车换胎必须是同规格、同厂牌、同结构、同层级、同花纹的轮胎,以求负荷、磨耗均匀,便于保养换位,有利于提高行驶里程和翻新率,也便于轮胎的管理。
2.季节换胎:冬、春季节主车后轴及挂车可换用翻新胎或成色较低的轮胎,以提高旧胎利用率,延长轮胎行驶里程。
3.成双换胎:新胎应成双更换,以利于轮胎搭配。
4.先客后货:客货混合车队可采用“先客后货”的用胎方法。
5.先主后挂:在主挂车轮胎规格一致时,可采用先主后挂的用胎方法。
(二)翻新胎的使用:使用翻新胎应注意质量等级。翻新胎一般应装在后轮上,客车前轮不得装用翻新胎。
二、做好现场管理
(一)保持气压正常
1.在车辆比较集中的站、点应结合例保配备专人在常温下进行补气工作,以保持轮胎气压的正常。
2.为了保持轮胎正常气压,至少七~十天用气压表检查一次,作好记录,每天将检查车号及结果予以公布。
3.建立定期检查制度。车队至少每月抽查气压一次,企业至少每季抽查气压一次,并将检查结果作为考核和评定驾驶员、胎工奖励的依据之一。
(二)防止轮胎超载
1.车辆应按标记吨位装载,不得超载。注意货物装载平衡,防止车辆在行驶中发生货物移动及倾斜等情况发生。
2.由于车辆改装需要改变轮胎规格时,要重新计算前后轴负荷,然后根据负荷再选配轮胎规格。选择轮胎规格的原则是:在轮胎负荷允许的情况下,应该尽可能采用尺寸较小的轮胎。
(三)做到合理搭配
1.同一车轴上应装配同一规格、结构、层级和花纹的轮胎。
2.轮胎花纹应根据道路条件选择,在同一车上的轮胎花纹要尽量一致。
3.成色不同旧胎混合装用时,应选择胎面磨耗程度相近的轮胎进行配装,直径较大的轮胎应装在后轮外档。
(四)排除机械伤胎:
发现车辆技术状况不正常造成轮胎机构损伤时,轮胎管理技术员应及时会同有关人员,查明原因,排除后,方可出车。
(五)注意轮辋组合
1.应注意轮辋挡圈与锁圈的技术要求。如发现与技术要求不符合时,均应进行修正或更换。
2.不同制造厂的轮辋、新旧轮辋、挡圈与锁圈尽量不混装;备用轮辋应组合存放。
(六)做好爱胎例保
1.出车前的检查
(1)检查轮胎气压是否符合规定,气门咀是否漏气,气门帽是否齐全,气门咀是否碰擦制动鼓。
(2)检查轮胎螺母是否紧固,叶子板、档泥板、货箱等有无碰擦轮胎现象,并设法消除。
(3)检查并清点随车工具。如橇胎棒、千斤顶、车轮螺帽、套筒板手、气压表、手锤、挖石子钩等是否齐全。
2.途中的检查
(1)途中检查应结合途中停车、装卸的各种机会进行。停车地点应选择清洁、平坦、阴凉(夏天时)和不影响其它车辆通过的处所。
(2)检查轮胎螺母有无松动,叶子板、栏泥板、货厢等有无碰擦轮胎现象,并设法消除。
(3)挖出轮胎夹石和花纹中的石子及杂物。
(4)检查轮胎的磨损情况,检视轮胎气压是否充足,模试温度是否正常,胎面胎侧有无不正常的磨损现象,轮辋有无损伤。
3.一日工作完毕后检查
(1)停车场地应干燥清洁无油污,严寒地区应扫除车场上的冰雪,以免轮胎与地面冻结。
(2)停车后应注意轮胎有无漏气,并挖出夹石和花纹中的石子及杂物。
(3)检查轮胎螺母有无松动,备胎架装置是否牢固。如发现车辆机械有碰撞轮胎的现象,应设法消除。
(4)途中如换用备胎,损坏的轮胎应及时送修,并补登拆装记录。
(七)汽车行驶中轮胎的使用要点
1.汽车应起步平稳、加速均匀、中速行驶、选择路面、少用紧急制动。
2.夏季行驶,应增加停歇次数,如轮胎发热和内压增高,应停车休息散热,严禁放气降低内压,也不要用冷水浇泼。
3.行车中应注意道路上的粗大、尖锐或锋利的东西,防止刺伤轮胎。
4.不得靠近道路边石或人行道边行驶,以免损伤胎侧。
5.汽车陷入深沟或行驶在泥泞道路上时,应避免车轮空转。
6.行驶中应避免急剧转向,以防轮胎与轮辋发生切割现象。
7.装用防滑链时,应两边并装,通过困难地段后应即拆除。
(八)掌握子午线轮胎的使用特点
1.严格控制内压,必须按标准充气。使用中要做到经常检查补气。
2.子午胎必须选用标准轮辋。
3.同一轴上,子午胎不得与斜交胎混装。
4.装子午胎的汽车前束量应小于斜交胎。一般在0~3毫米范围内。

第三章 轮胎的保修
一、轮胎的保养
(一)汽车和挂车的轮胎保养间隔里程一律按汽车和挂车的相应保养间隔里程的规定执行。
(二)一级保养主要作业项目
1.检查轮胎螺母是否缺少及松紧程度,气门咀是否漏气,气门帽是否齐全。如发现损坏或缺少应即修理或补气。
2.挖出夹石和花纹中的石子和杂物,如有较深伤洞应用生胶堵塞。
3.检查轮胎磨损情况,如有不正常的磨损或起鼓变形等现象应会同轮胎管理技术员和驾驶员进行研究,找出原因,予以排除。
4.如需检查外胎内部时,应拆卸检查,如有损伤予以修补。
5.检查轮胎搭配有无不当,轮辋、挡圈、锁圈是否正常。
6.检查轮胎(包括备胎)气压、并按规定补足。
7.检查轮胎有无与其它机件碰撞现象,备胎架是否固定完好,如有不符合要求者,应予以纠正。
8.填写保养记录。
(三)二级保养主要作业项目
二级保养时,除执行一级保养的各项作业外,还应进行下列作业:
1.轮胎拆卸后应测量直径以作为换位和搭配的依据。
2.轮胎解体检查:
(1)外胎胎冠、胎肩、胎侧、胎内有无内伤、夹空、起瘤和变形等现象。
(2)内胎、垫带有无咬伤、折绉现象、气门咀、气门芯是否完好。
(3)轮辋、挡圈和锁圈有无变形、生锈,并视情上漆。
(4)轮辋螺栓承孔有无过度磨损或损裂现象。
3.排除故障后,进行装合和充气。
4.按规定进行轮胎换位。
5.发现轮胎有不正常磨损或损坏应会同有关人员查明原因,予以排除。
6.填写保养记录。
(四)子午线轮胎的保养
1.子午胎胎冠,胎侧一旦被刺伤、刮破,露出钢丝要及时修补,以免水气进入胎体,锈蚀钢丝帘线,造成早期损坏。
2.由于子午胎在使用中下沉量大,胎圈应力高,容易造成损坏,折装时应予注意。
(五)操作要点
1.充气
(1)轮胎充气应按照轮胎标准上规定的标准气压执行。但为了使轮胎在各种不同条件下能更好地应用和延长轮胎寿命,在路拱较大的地区行驶的汽车其后轮外挡轮胎可照标准增加20~30kPa(0.2~0.3kg·f/cm2)。
(2)新胎在未装配前应先紧固内胎气门咀垫片螺帽,以防在使用中漏气。
(3)充气前应检查气门芯与气门咀是否配合平整,擦净灰尘。充气后应检查是否漏气,并将气门帽装紧。
(4)充入的空气不得含有水份和油液。
(5)充气时应注意安全防护。充气开始时用手锤轻击锁圈,使其平稳嵌入轮辋圈槽内,以防锁圈跳出。
(6)气压表应定期进行校对,以保证气压表读数准确。
2.换位
(1)为了使轮胎磨损均匀,应结合车辆保养周期进行轮胎换位。在路面拱度较大的地区或夏季用胎,轮胎磨损差别较大时可增加换位次数。
(2)轮胎换位的方法常用的有“循环换位”法和“交叉换位”法两种,凡整车更换轮胎的汽车,可以采用以上换位法。凡装用不同成色的轮胎可以根据情况合理换位。
(3)轮胎换位时应按所调换的胎位调整气压。
(4)轮胎换位后须作好记录。
3.拆装
(1)拆装轮胎须在清洁、干燥、无油污的地面上支顶牢靠进行。
(2)拆装轮胎要用专门的工具,不允许使用大锤敲击或其他尖锐的用具拆胎。
(3)外胎、内胎、垫带、轮辋等必须符合规定时,才能进行组装。
(4)安装有向花轮胎时,应注意花纹方向标记。
(5)内胎装入外胎时,在外胎内部和垫带表面涂上滑石粉。
(6)气门咀的位置应装在轮辋气门咀孔的正中。如轮胎胎侧有轻点符号时,应将气门咀对准该符号,以便于平衡。轮辋上有配重块的轮胎,应做平衡调整。
(7)双胎并装时,应将里挡轮胎的车轮螺栓紧固后,再装外挡轮胎。两轮通风洞应对准,两胎气门嘴应按180°对称排列,并与制动鼓观察孔呈90°。
(8)无内胎轮胎每装一次,需要换上新的“O”型圈,“O”型圈要求完好,并将它放在植物油浸泡片刻。
(9)无内胎轮胎胎冠装有钢带时,应先把轮胎装在轮辋上,并充入1.5kg/cm2的气压,小心把钢带剪断除下。
(10)无内胎轮胎充气过程中,应用皂水检查轮辋与胎圈接触部“O”型圈、气门咀垫、气芯等处是否漏气。
(六)机具设备的维护
轮胎机具设备应指定专人负责保管,经常保持清洁,定期加油检修,防止漏油、漏电、漏水、漏气。空气压缩机是轮胎工作的重要设备,应配齐安全阀、油水分离器、压力表和自动开关,并定期检查,加强维护。做到安全生产,延长寿命。
二、轮胎的翻修
(一)轮胎的修补
1.轮胎修补要从“小”作起,即要及时修好小伤、小洞、小裂口。同时,根据其损坏的类型来决定其修补方法。
2.凡营运汽车较多的单位,可设轮胎修理小组,配备简易修补工具,对轮胎进行小修。
(二)轮胎的翻新
1.轮胎在使用过程中,应注意胎面的磨损程度和胎体的技术状况,符合翻新条件时,应及时送厂翻新,不可勉强使用,或不经翻新一直使用到报废。
2.轮胎花纹残留极限,可根据国家有关规定执行。

第四章 奖 惩
一、为了鼓励职工管好、用好轮胎,提高轮胎行驶里程,达到降低运输成本和节约原材料的目的,汽车运输管理部门可以根据财政部、劳动人事部、国家经委颁发的《国营工业、交通企业原材料燃料节约奖试行办法》的精神制订轮胎奖惩办法实施细则。
二、建奖条件:凡轮胎管理制度健全、统计考核凭证完善,轮胎实际里程符合上述试行办法精神的单位均可建立轮胎节约奖。
三、建奖对象:主要是驾驶员、胎工、轮胎管理技术员以及其他有关人员。
四、奖金分配比例由各地自行制定。
五、建奖种类及奖罚幅度:一般可分阶段考核奖惩,也可以将轮胎管理中的某些薄弱环节作为奖惩的附加条件。
六、奖金来源及罚金去向:奖金从轮胎超额里程节约价值中提取。奖金计入成本,单项列支,免交奖金税。罚金冲减轮胎成本。


楚雄州人民政府关于印发楚雄州州属行政事业单位非税收入统筹管理暂行办法的通知

云南省楚雄彝族自治州人民政府


楚雄州人民政府关于印发楚雄州州属行政事业单位非税收入统筹管理暂行办法的通知


 

楚政通〔2008〕48号



各县、市人民政府,州级有关部门,楚雄开发区管委会:

《楚雄州州属行政事业单位非税收入统筹管理暂行办法》已经十届州人民政府第8次常务会议讨论通过,现予印发,请认真贯彻执行。



二OO八年七月十四日



楚雄州州属行政事业单位非税收入统筹管理暂行办法


第一章 总 则
第一条 为加强非税收入管理,堵塞非税收入使用中的漏洞,从源头上防范腐败,规范财政资金使用,根据财政部《关于加强政府非税收入管理的通知》(财综〔2004〕53号)、云南省人民政府《云南省机关公务员津贴补贴规范方案》(云政发〔2007〕58号)文件精神,结合我州州属行政事业单位实施公务员规范津贴补贴经费由财政全额安排的实际,制定本暂行办法。
第二条 州属行政事业单位非税收入的管理,坚持“国家所有,政府统筹,财政管理”的原则。
第三条 行政事业性收入必须依照国家法律法规规定收取,严禁自立名目、扩大范围、提高标准收费。
第四条 国有资产有偿使用权出让(出租和承包),必须采取招标方式确定,出让年限不超过5年。
第二章 统筹范围
第五条 纳入统筹的单位。已实施规范津贴补贴的州属行政和参公管理事业单位。
第六条 纳入统筹的非税收入。未纳入财政预算管理的行政事业性收费收入(包括纳入财政管理行政事业性收入)、国有资源(资产)有偿使用收入、事业单位经营性收入、其他非税收入。
第七条 未进行收入分配制度改革的州属事业单位取得的非税收入统筹比例,暂按原统筹办法执行,待收入分配制度改革后另行规定。
第三章 统筹办法
第八条 统筹比例。非税收入扣除成本费用后,按以下比例统筹。
(一)2008年度,按40%纳入部门预算安排使用,60%政府统筹上交州财政。
(二)2009年起,按30%纳入部门预算安排使用,70%政府统筹上交州财政。
第九条 成本费用核定。非税收入成本费用由州财政局按以下原则和项目计算核定。
(一)取得行政事业性收入发生的工本费、代收代扣手续费等;
(二)取得经营性国有资产出租和承包收入发生的税收和管理费等;
(三)取得事业经营收入发生的直接成本费用;
(四)州委党校、州军转干校、楚雄警察培训学校、楚雄州财会人员培训中心办学收入发生的成本费用,按取得收入的50%核定成本费用。
第十条 统筹减免。部门为取得非税收入一次性基础设施建
设和设备购置支出较大的,由单位申请,州财政局根据实际情况对单位统筹给予减免。
第十一条 统筹收入划缴。州财政局于每年7月和12月分两次与预算单位清算后直接划缴州级财政。
第四章 使用与管理
第十二条 政府统筹的非税收入资金纳入当年财政预算,统一安排使用。
第十三条 州财政按比例返还拨付预算单位的非税收入资金,纳入部门预算安排使用,主要用于改善办公条件、弥补正常经费不足,严禁发放任何形式的津贴补贴。
按比例返还拨付预算单位的非税收入资金,由州财政局根据收入情况和支出情况,分期拨付。
第五章 监督检查
第十四条 州财政局负责对政府非税收入的监督检查,对政府非税收入的项目、标准、票证及收缴等情况实行稽查制度。被查单位必须接受州财政局的监督检查,如实提供有关资料和反映情况,不得拒绝、阻碍检查。
第十五条 非税收入执收单位有违反本办法行为的,依照国务院《违反行政事业性收费和罚没收入收支两条线管理规定行政处分暂行规定》(国务院令第28l号)、《财政违法行为处罚处分条例》(国务院令第427号)的有关规定,对单位给予警告或通报批评。对直接负责的主管人员和其他直接人员给予记大过处分;情节较重的,给予降级或者撤职处分;情节严重的,给予开除处分。
第六章 附 则
第十六条 本暂行办法施行前有关政府非税收入统筹管理的规定与本办法不一致的,按本办法执行。
第十七条 本暂行办法自2008年1月1日起施行。
第十八条 本暂行办法由州财政局负责解释。